Gift Card Holder

Gift- Card Holder
Andrea Duckworth

1. Cut 2 pieces of felt 2 ¾” X 4 ¼”. Cut 1 stiff interfacing (ex. Timtex)
2. Cut 1 different color piece of felt 3 ½” X 2 ½”.
3. If you want a hangar: Cut a 6” piece of ribbon or trim
4. “Sandwich” with felt, interfacing, (if you are using a hangar, form your trim into a loop. Place this at the top or short side. Have the raw edges about ½” on the “inside”) and finish with felt on top. Sew as close to the edge as you can all the way around making sure your hangar doesn’t get “hung up” J
5. Make a “cut-out” on the different colored felt.
6. Cut out a piece of netting smaller than the different colored felt.
7. Place the net on the back of the different colored felt.
8. Position the netting and different colored felt piece on top of the sewn ones. They should be just above the seam line on the bottom and equal on the sides.
9. Sew as close to the edge as you can on the 2 long sides and the bottom. Make sure the felt is sewn down.
10. Decorate with sequins, glitter, fabric paint, etc.
11. Enjoy!